<img alt="" src="https://secure.insightful-enterprise-intelligence.com/784283.png" style="display:none;">
Ryan McAbee
6057541
https://ki-dev.outsystemsenterprise.com/CEPContentPortalUI/img/logo3.png

The Rise of Workflow Automation in Wide Format Graphics: Stop it at the Door

Sep 20, 2017 12:22:28 PM

Spend any amount of time around a prepress department, and you will eventually hear “garbage in, garbage out” followed by a few choice words. Some design flaws, such as using Pantone 180 C to Pantone 180 U, can be easily addressed. Other design issues, like low image resolutions, cannot be corrected. The quality of the files that customers provide has a tremendous impact on the speed and accuracy of producing that work.

A robust workflow identifies the issues, automatically fixes as many as possible, and then reports the remaining ones for the operator to inspect. Print shops need to stop problem files at the door or the point of onboarding the job. The further downstream in the production process an error is caught, the costlier it becomes to correct and, in the worst of cases, leads to redoing the entire job.

Where the preflight check occurs and by whom depends on how the work comes into the shop. Work entering the shop from a web-to-print solution can be automatically preflighted and pushed back to the user to correct or approve existing issues. For most other file submission paths, someone in the shop will need to submit the file into the preflight software and check the results report. The first line of defense for retail shops is employees at the counter or customer support representatives (CSR) for shops without walk-in service. The first pass will identify any major issues that would involve notifying the customer. The second preflight point, focused more on prepping the file based on the job specs and production plan, is performed at the prepress department. These are the folks that can work on and solve the hard-to-fix issues.

What common issues can preflight software identify and correct?

IdentifyFix
Low resolution imagesNo
Color spaces (RGB, Indexed, CMYK, etc.)Yes, conversions
Color name remapping – renaming or consistently naming spot colorsYes
Rich blackYes
Ink Coverage/Total Ink LimitYes
Overprint/knockout controlsYes
Transparency settingsYes
Page geometry/dimensionsYes
Page bleed – image/object extensionYes
Font embeddingYes
Object manipulationsYes

 

There are several options for preflighting in wide format graphics, all with varying degrees of sophistication. The best approach is to test existing files with known problems against each preflight solution in addition to reviewing its technical capabilities.

  • Independent preflight software solutions, such as Callas, Enfocus, and Markzware. These solutions support all segments of the print industry which make them robust but more complex to setup. There are usually options for automation, e.g., hotfolders or APIs.
  • Included or add-on modules at the RIP/DFE. This option is best as a late stage check before production.
  • As part of a workflow management solution. These offer similar capabilities to the independent preflight solutions and, in many cases, are licensed from those same vendors.
  • Preflight as part of the web-to-print solution. Usually a limited check for image resolution and color space, i.e., RGB.

Preflighting, just like the pre-flight checklist for pilots, is required to ensure everything is in proper working order for a safe and successful journey. Without it your workflow is headed for a bumpy ride.

Read more in the Rise of Workflow Automation in Wide Format Graphics blog series.

Have stories to share or questions to ask, then reach out to @mbossed on Twitter, or LinkedIn, or good ole e-mail.